New YH-718 Loop Volt and MA Signal Source Process Calibrator Meter Tester
Description
New YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester
Feature:
1. Rapid induction knob, Single-handed operation possible
2. mA current source output, simulation and measurement functions; showing the percentage of mA and range
3. mV/V voltage output, measurement functions; showing the percentage of mV/V and range
4. 0.02% accuracy and 1μA/10μV resolution
5. Steps and ramp output optional
6. 24V loop Power and processing mA measurement
7. Rechargeable management module built-in, able to charge while working1. Rapid induction knob, Single-handed operation possible
Current Output Mode:
SOURCE mA mode: Calibrator outputs current
SIMULATE mA mode: Calibrator simulates an external power supply with a two-wire transmitter
Voltage Output Mode:
Instrument outputs a high - precision voltage signal 0-100mV/0-10V; Voltage signal output resolution up to 10μV
Automatic Ramp Current Output:
The calibrator can periodically output a changing current / voltage signal applying to the external load or loop device continuously according to the time interval automatically.
Technical Specifications:
DC mA (source output / simulation / measurement):
Range: 0 - +24 mA
Resolution: 1μA
Accuracy: ± (0.02% +4 words)
DC Voltage (output / measurement):
Range: 0 - +10 V
resolution: 1mV
Accuracy: ± (0.02% +4 words)
Range: 0 - +100 mV
Resolution: 10μV
Accuracy: ± (0.02% +4 words)
Loop Power :24V—26V
Tags:
Products Recommeded by Tui21
Vag COM , TCS CDP , VAS5054A , GM Tech2 , Iprog+ Programmer , Orange 5 programmer , SBB3 PRO3 Key Programmer , wiTech MicroPod II , T300+ Key Programmer, Iprog, Scania VCI3, mercedes star diagnostic, Porsche Piwis, vocom 88890300, Renault CAN Clip, SBB Pro2 Key Programmer, NEXIQ USB Link