Car Multi-Function Information Display OBD General Trip Computer Y01

Note:Support cars with OBDII Port after 2003

Introduction of functions:

Components of Trip Computer

1. The host

2. LCD screen: 240*120 Lattice LCD

3. Diagnostic cable: to connect TRIP COMPUTER

and the car

4. [↑]: Roll up button

5. [↓]: Roll down button

6. [OK]: Confirm button

7. [C]: Return button

8. Steady holder

Trip Computer main device

1. Diagnostic cable connect port

2. The mount place

Installation

1. Mount the vacuum tape on the car windshield

2. Connect Trip Computer to the Vacuum holder, adjust it to a best angle

3. Put the host on steady hoster.

4. Connect the cable, the Trip Computer and OBDII port of the car correctly

Note: The length of the diagnostic cable is 1.0m, please decide the mount and wire laying according to the length of the cable

Technical Parameters:

Product Size	9.3cm x 6.2cm x 2.2cm
Product Weight	0.9KG
Working Condition	Ambient temperature:-20°C -80°C Relative Humidity: 10%-95% Enviroment Noise <=60db(A)
Language	English
Alarm sound level	>=30db
Working Voltage	DC 8V-18V
Display Content	Instantaneous fuel consumption/ Engine temperature/ Battery voltage/ Clock

Package including:

1pc x Car Multi-Function Information Display OBD General Trip Computer Y01

Prev: Immo Emulator For OPEL

Next: Immo Emulator For MATIZ